WHY US

Superior Nano Carbon Technology

We have developed an innovative technology, Ultrasafe ZoGEM, which is a premium and superior Nano Carbon based highly conductive ground enhancement backfill material to enhance the resistivity of earth electrodes. This Nano Carbon technology is specially engineered and specifically developed for the need of earthing industries with years of extensive R&D. ZoGEM makes life easy for electrical engineers by achieving permanent, stable and low resistance earthing solutions even in difficult ground conditions and in all types of soils.

Ultrasafe ZoGEM Powerset is a synthetic material manufactured with specific raw materials in controlled ratios. The raw materials go through a series of processes and thermal treatments to become a dust-free granular mixture with exceptional electrical properties. ZoGEM is chemically inert with very low soluble sulphate content and it can be used with all conventional types of cement and most proprietary resin based cements, adhesives and gypsum plasters.

Conventional ionic-based earthing materials like bentonite, charcoal, etc., which conduct electricity through movement of charged ions. This process requires the presence of an effective electrolyte such as water for conduction. This is where ZoGEM’s superior Nano Carbon technology comes into play. Ultrasafe ZoGEM Powerset conducts electricity in the same way as metals- through the movement of electrons. This means it does not require water to conduct electricity and is not affected by dryness, thus eliminating the need for periodic watering.

Another prime advantage of ZoGEM is its resistivity. It has ultra-low resistance level of 0.004 ohm-m.

Material Specification

Item	Specification	Image
Fixed Carbon	95 to 98.5%
Ash , Sulphur	1.5 to 5%
Size grading	10 to 20% Below 0.1mm 5 to 90% Above 3.15mm
Thermal Stability	Between -10°C and +65°C Ambient temperature
Portland Cement	10 to 20%

Ultrasafe Permanent Earthing System Vs Conventional Earthing System:

Parameters	Ultrasafe ZoGEM	Other Backfill materials
Resistivity	Ultra-low resistivity upto 0.04 Ω‐m.	Resistivity 1 Ω‐m and above.
pH Range	6.9 – 7.2 (Neutral range)	Most of materials are alkaline with high pH.
Conduction	Electronically conductive like metals.	Ionic-based conduction, dependent on moisture.
Environmental suitability & Installation	Suitable for all types of soils like hilly terrains, made up ground, rocky soils, etc. Installation is easy as only a borehole is required.	Not suitable for all types of soils. Installation is difficult in rocky soil, hilly terrains as it needs wide excavation.
Performance	Constant high conductivity in all environments. Does not leach or get washed away even in wet soils.	Backfill compound dissolves in water and hence fails to provide safe discharge over a period of time. This leads to lot of fluctuations.
Corrosion	No corrosion since metal rod is embedded in inert condition.	Pipes corrode due to moisture & heat after a period of time.
Maintenance & Life	Maintenance-free performance. Does not required watering for 35-40 years.	Requires watering and frequent recharge of backfill compound. Has to be replaced in 7-8 Years
Cost	Initial cost is higher than conventional earthing but maintenance cost is zero.	The overall cost is higher than Ultrasafe earthing considering the frequent recharge and maintenance.